New Products

The Tek-CARE^®400 P5 adds many improvements, along with a clean, contemporary look.

The Tek-CARE^®400 P5 system uses the same master stations as our Tek-CARE^®400 system, and includes all the same great integration features, including reporting, wireless phones, pocket paging, ADT interface, and Versus^® tracking. Plus, the new P5 system can also function as a resident check-in system.

P5 patient stations include one or two DIN jacks. Staff, duty and multipurpose stations are also available, along with a resident pull-cord station and a resident check-in station with pull-cord and call button.

The new, stylish P5 corridor lights have four multicolor LEDs that can be individually programmed to any RGB color-and since they use LEDs, there are no bulbs to replace.

The Tek-CARE^®400 P5 system’s NC401TS master has a 10″ color LCD touchscreen, and can display calls from the entire facility. The master includes a built-in keyboard with water-resistant rubber overlay for creating custom pages, and a membrane keypad for the most commonly used functions. Its small footprint increases the space available at the nurses’ station.

For more information, contact our sales staff at (800) 327-8466 option 3, or visit www.tektone.com/tekcare400.htm.

You asked, TekTone listened! The latest NC470 Tek-BRIDGE™ software (rev. 1.0.4777) adds valuable features to the Tek-CARE^®400 Nurse Call System. Our most advanced nurse call system is enhanced with these great new features:

• Email output component—nurse call system notifications can be sent to staff email addresses, adding another means of communication.
• Password access list—offers multiple levels of password protection.



• Sorted listing on NC401TS—lists on the master station are alphabetized or in numerical order.
• CSV output option in reporting—reports may be exported to Microsoft Excel via the .csv format for viewing and editing.
• New remote event monitor features—password access provides additional security, and routine calls can be silenced using Tone Silence.
• Configurable Home Zones—show a subset of staff members, such as those assigned to selected zones, on many NC401TS menus.
• Entry-masked passwords—asterisks display in place of typed passwords for added security
• Selecting content in the Config Tool is faster—every table in the Config Tool now has All and None buttons.

Upgrade your Tek-CARE^®400 Nurse Call System today! For more information, call our Sales Department at (800) 327-8466 or visit www.tektone.com.

TekTone^® remote receiver adds dome light annunciation
to the Tek-CARE^®500 Wireless Emergency Call System

The NC506ES Remote Receiver allows external dome lights and dialers to be connected to our Tek-CARE^®500 Wireless Emergency Call System, providing an alternate annunciation path. The remote receiver features 4 individual dry contact outputs, each of which can be programmed to be triggered by a single transmitter. The outputs are directly triggered by their associated transmitters, and are not dependent on the Tek-CARE^®500’s master station computer.

Other features include:

• Includes built-in tamper detection outputs that can be connected to an external alarm system.
• Clean appearance for interior mounting.
• Functions independently of the Tek-CARE^®500 master station computer.
• LEDs display current status of transmissions.
• Hidden wiring access.
• Screw terminal connections.
• 4 dry-contact outputs.
• Supports up to 4 transmitters.

US list price of the NC506ES Remote Receiver is $280.00. For more information, call our Sales Department at (800) 327-8466 and ask for specification sheet IL875, or download it from our online literature index at www.tektone.com.

The LS452 ADT Interface Software uses the HL7 Standard to receive patient data, and then displays it on LCD touchscreen nurse master stations. The LS452 Software runs on the NC470 Tek-BRIDGE^™ PC, which is connected to both the Tek-CARE^®400 Nurse Call System and the facility’s network.

The LS452 Software receives patient information from the facility’s Admit, Discharge, Transfer system via the facility’s network. Patient name and room/bed number are then displayed on NC401TS Touchscreen Nurse Master Stations. Programming is quickly done via an online configuration tool.

With this software release, accessing a facility’s Hospital Information System maintains a focus on patient census information for use in nurse-call-related activities and on patient and bed data for bed management. Not only does this interface support efficient patient care by providing detailed patient information, but administration will benefit from monitoring and reporting features to ensure the facility is operating at an optimal level.

US list price is $12,500.00 for the LS452 ADT Interface Software using the HL7 Standard. For more information about our Tek-CARE^®400 Nurse Call System, contact our Sales department at (800) 327-8466, option 3.